Wireless Hyundai Logo Shadow Projector Ghost Lights Kit
This shadow ghost lights for all cars, these shadow lights have a sensor that will work with the door opening and closing every time you open the door it will on automatically and create a shadow of the Logo on the surface. This product is completely wireless especially design for Car modification for making your vehicle fancy gives more fun to the driver. its result is very bright at night or in dark places. There Two small magnets include in package you to place this magnet on door sill area when close the door shadow light comes close to this magnet and turn off automatically. installation is very easy no deed to wiring and drilling on the Car body, just stick the light on Car door panel at the bottom side and stick the magnet on Car door frame sill area.
Features
The product can be installed at the body kit, chassis or another suitable place.
Easy to install with 3M double-sided adhesive tape, no more trouble in making a hole.
High power, high efficiency, energy-saving, no noise, no electric interface.
3d style laser light of the illuminated entry system
The special design causes the product with strict waterproof and thermal performance, which will make sure the normal service in various harsh environments.
Specification
1.Powered by 3x AAA batteries 4.5V (batteries are not included)
2.Output power: 3W
3.Operating temperature: -40 degrees~105 degrees
4.Dimensions: 6.5 x 6.5 x 1.5cm
5.Special Features: Laser light,door lights,welcome light
Install Instruction
1. Install instructions about the batteries: Put 3 pcs AAA(1.5V) batteries in the battery case and install them according to the positive & negative as marked in the case. Then close the batteries case.
2. Install instruction of the shadow light: Stick the Magnet on the bottom of the Car frame. Stick the car light on the Car door. The distance between the Magnet & Car light is about 10mm. When you close the Car door, the Magnet is at the under the face of the sensor on the car logo light.
3. Automatic Control & Manual Control: When you open the door, the logo will be shown on the ground, and it will turn off automatically after 2 minutes. If you want the light on/off, just need to press the button on the head of the light.
1.Powered by 3x AAA batteries 4.5V (batteries are not included)
2.Output power: 3W
3.Operating temperature: -40 degrees~105 degrees
4.Dimensions: 6.5 x 6.5 x 1.5cm
5.Special Features: Laser light,door lights,welcome light
Install Instruction
1. Install instructions about the batteries: Put 3 pcs AAA(1.5V) batteries in the battery case and install them according to the positive & negative as marked in the case. Then close the batteries case.
2. Install instruction of the shadow light: Stick the Magnet on the bottom of the Car frame. Stick the car light on the Car door. The distance between the Magnet & Car light is about 10mm. When you close the Car door, the Magnet is at the under the face of the sensor on the car logo light.
3. Automatic Control & Manual Control: When you open the door, the logo will be shown on the ground, and it will turn off automatically after 2 minutes. If you want the light on/off, just need to press the button on the head of the light.
Show Now
Comments
Post a Comment